ARGON8M supports both types of sustain pedal polarities when connected via the sustain pedal input port.
“Positive / Normally Open” pedals can be connected / disconnected whilst ARGON8M is powered on, however “Negative / Normally Closed” pedals must be connected before powering on the device and disconnected after powering off the device, else the sustain pedal behaviour will be reversed. If your sustain pedal has a polarity switch we recommend setting it to the “Positive” polarity.
If you are unsure of your pedal’s polarity type, it is recommended to only connect / disconnected the pedal whilst the device is powered off.
You can find some more information on our quick Modal Minute guide on YouTube.